JoaCHIP Report post Posted June 17, 2018 I'm not sure exactly when this happened as I usually run ASIO which works well. But it seems to me that (at least) the latest Windows 10 version (v1803, build 17134.112) has completely lost support for good old WaveIn (both WDM and MME in Samplitude). No matter how nudge the M-audio 2496 and Motu 2408mk3 drivers, recording only works in ASIO mode. This goes for all the software I have, not just things made by Magix. Software that I've been using for ages on the same two soundcards in Windows 7 and earlier are no longer working. The problem is that not all software has ASIO support. When googling around, I only find useless "tips" like "try updating your driver" (yes, did that), "try rebooting" (yup, did that), "try enabling permissions to the mic" (new thing in Windows 10 which only lists those Metro apps that noone has anyway) and such. Has anyone else experienced something like this with Win10? My hardware setup hasn't changed for years. Here's what Samplitude shows when trying to record in MME or WDM mode (regardless of using 16 or 24 bit record mode, and regardless of sample rate): Quote Can't open waveform input device 'Line 1/2 (M-Audio Delta Audioph' ! (The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats.) Change driver bit resolution to 16 Bit or switch driver system to WDM compatible in system options. Quote Can't open waveform input device 'PCI-424 2408mk3:Analog-A 1-2 (M' ! (The specified format is not supported or cannot be translated. Use the Capabilities function to determine the supported formats.) Change driver bit resolution to 16 Bit or switch driver system to WDM compatible in system options. I had the driver set up 16-bit resolution here btw. I've also tried SoundForge, VUmeter.exe, Wavosaur and OBS screen capture. All dead. Any ideas? Quote Share this post Link to post Share on other sites
TerryBritton Report post Posted June 20, 2018 I use Voicemeeter to bring my ASIO interface (in my case a MOTU Ultralite mk3 hybrid) into OBS every day, and have not noticed any change. Voicemeeter is delivering via WDM/KS. Seems odd that both your M-Audio and your PCI-424 would both require driver updates at the same time due to the same Windows 10 update! Please definitely report back if you hear anything from either company's support! [EDIT - Nix on that - see below!] Terry Quote Share this post Link to post Share on other sites
TerryBritton Report post Posted June 20, 2018 Oh WAIT!!! I do know the answer - if you have EVER changed the permissions for your camera or microphone, then the new Win10 has introduced a new "master switch" that defaults to being OFF if you had changed those settings for any application at all. So, go to your permissions for the microphone and simply switch that fairly obvious master switch to "ON" (same with your camera). This affects all inputs - not just the "microphone". Sorry, should have thought of that straight off. Terry Quote Share this post Link to post Share on other sites
JoaCHIP Report post Posted June 20, 2018 Thanks for your help, but I already did both before writing here: I have the latests drivers. I enabled said permission. Quote Share this post Link to post Share on other sites
TerryBritton Report post Posted June 20, 2018 Well, so much for the easy answers! Terry Quote Share this post Link to post Share on other sites
garygillespie Report post Posted September 30, 2018 My Delta 1010LT was working fine in Windows 10 until it did an update. Now when trying to record in Sound Forge I get an error: Can't Open waveform input device ... (Undefined external error.) Change driver bit resolution to 16 Bit or switch driver system to WDM compatible in system options. What are the options I need to change to be able to record again? Quote Share this post Link to post Share on other sites
Guest Can't record anymore Report post Posted January 12, 2019 Hi you all, Before I used the pro X2 suite without problems. Now I changed to a new PC with Windows 10. After re-installation of soundcard Asus Essence STX II and Samplitude, I checked my audio settings by pressing Y but It does not work at all. I hear the sound when I play some music but samplitude do not record anything :( What do I do wrong??? Thanks for the help, Greetings from out of Belgium Ben Quote Share this post Link to post Share on other sites
Guest somebody Report post Posted June 30, 2019 Has anyone found a solution to this? I finally made the switch from xp to 10 and have had problems with sound card, drivers and Samplitude getting along together. Quote Share this post Link to post Share on other sites
Johnny Blade Report post Posted June 30, 2019 Samp Pro X4 + Windows 10 build 1903 (x6) here. I use WDM with AudioQuest DragonFly in my Notebook. I've never experienced any problem. Quote Share this post Link to post Share on other sites
fmm Report post Posted August 13, 2019 On 6/20/2018 at 12:25 AM, TerryBritton said: Oh WAIT!!! I do know the answer - if you have EVER changed the permissions for your camera or microphone, then the new Win10 has introduced a new "master switch" that defaults to being OFF if you had changed those settings for any application at all. So, go to your permissions for the microphone and simply switch that fairly obvious master switch to "ON" (same with your camera). This affects all inputs - not just the "microphone". Sorry, should have thought of that straight off. Terry Thanks terry this was driving me nuts this fixed my problem samp,real band ,band lab and many others don't know how this got disable sure effected many apps eric Quote Share this post Link to post Share on other sites
TerryBritton Report post Posted August 13, 2019 2 minutes ago, fmm said: Thanks terry this was driving me nuts this fixed my problem samp,real band ,band lab and many others don't know how this got disable sure effected many apps eric That drove everybody nuts it affected! (Me included!) Glad you have it sorted now. :-) Terry Quote Share this post Link to post Share on other sites
