Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by tdor

  1. I tried Audiogridder, seems to work but the VSTs does not load correctly into the Audiogridder frame, instead I have duplicates, offset Windows, my Desktop is shown inside the Audiogridder Window, my mouse jumps all over the screen. What version of Audiogridder works? I tried both 1.1 and 1.2 beta. Anyone with the same experience?
  2. How does it work with Magix Low Latency Driver and your onboard audio chip? Your Mobo has one. Disconnect the Audiobox. Cheers, Thomas
  3. Hi Unwritten, are you using on your laptop the same audio interface? Sounds like the #1 suspect! Try the Magix Low Latency Driver, with your AudioBox, and with Onboard Audio. Connect your AudioBox directly, no USB hub, and to a USB port that is not shared with other devices. There could be quite a few other reasons for this issue :-| Cheers, Thomas
  4. Yes, I have a fresh installation of the whole X3 suite; I just wonder what update patch works best for X3, the very last one, 518?
  5. Danke Werner, freut mich dass Du mir helfen wolltest, das war in der Tat Arbeit. Aber es war nicht ganz so einfach wie Du beschreibst: Irgendwie waren keys in der registry im Klo. Hier Anweisungen, falls so was mal passiert: https://www.kapilarya.com/fix-an-error-is-preventing-this-key-from-being-opened SysinteralsSuite runterladen, dann dort rein CDen, cmd als admin starten, folgendes eingeben. psexec -i -d -s c:\windows\regedit.exe Dann kannst Du selbst jeden Key, auf den Du nicht (mal als admin) zugreifen kannst, ändern. Dann z.B., Administrators als owner eingeben. Full Control, etc, bla bla bla In English: If you ever run into an issue with access to registry keys being denied have a look at: https://www.kapilarya.com/fix-an-error-is-preventing-this-key-from-being-opened Download Microsoft's SysinteralsSuite, open cmd as admin, cd to that folder SysinteralsSuite folder and enter: psexec -i -d -s c:\windows\regedit.exe Fix you registry as you need, add "Administrators" as user with Full Control - AND STAY AWAY FROM REGISTRY CLEANERS, that's all BS and causes more harm than good. Cheers, Thomas Ps. Good to know about Everything, I am using Ultrasearch by https://www.jam-software.com/
  6. When I try to re-install, I am receiving an error 1603, access to a key in the registry denied. I tried to claim permissions for that specific key by all means. No chance, no access. Because there is somewhere a 1 instead of a 0, I am not spending the next week to re-install a complete system. Thanks for helping TotteG
  7. I cannot re-install Independence from my DVD for the following reason. Any ideas? I would think the installer takes care of installing that RegInBundle.exe ?? I contacted customer support, will share what they advise.
  8. dunno, I don't have 3.5, 3.3 is what came with Sam X3 - will try instructions on the link you provided. Thanks!
  9. curiosity killed the Cat. I tried to uninstall Independence 3.6, and revert to 3.3, errors errors errors, now I have neither. I am tired of this BS. No X5 and I am flushing X3 too, countless hours of troubleshooting, no more. I knew that I would end up like this. So sad.
  10. hmm, thanks, Thomas, 3.6 works fine in X3, I'll decide when I decide to upgrade to X5. Thomas
  11. Well, I have X3 installed, I just wonder why some files load and some don't. Without any noteifications, where is the Logic in that? I can load the Vita instruments, too. No restrictions. I have the impression X5 is more stable than X3, with X3 I don't get far without crashing. Some days are better than others. Thanks Werner, (I have a Humpen with Wilhelmshöhe on it, bought it here in TX, such a great park)
  12. @TotteG Hi Thomas, I have Independence, got this from customer service. For example, X5 does not load "Independence Content Image File 10" - even when I use the find function in Indi and point directly at that file. Try to load, from the Pro Suite, 03 Acoustic Bass / Upright Bass 1 BIG Key-Switch A-1, or anything below that list. The Mexican Bass loads. Thanks, also Thomas Ps. I cannot recall how I downloaded those 70GB image files for Independence, it must be so obvious that I did not take any notes. Maybe the file is corrupt, or not registered properly.
  13. I am trying the X5 trial, I observed that Independence cannot find all the files from the Independence version I got with X3. Will I have to download and re-install the whole suite? If I load the same project in X3, all is fine. In X5 some files load some don't Anyone with the same issue, aka upgrade hell?
  14. Fantastic! I can't believe that's over a regular telephone. Terrific job.
  15. "I am not up to bother my relatives " ... typical for deflecting guilt. Truth is, his relatives do not talk to HIM anymore, including his daughter. He ended as very lonely man.
  16. Before and after Blade Sounds demo please, we want to hear the difference now.
  17. Is it Sascha who created the FishFillets plugins? http://digitalfishphones.com
  18. Get a Nakamichi Tapedeck from ebay, or a reel to reel machine, record from your DAW and bring it back it. Plugins are boring.
  19. Vlad got that limiter, too: https://vladgsound.wordpress.com/plugins/limiter6/ Here a thread that may be interesting for you: https://www.gearslutz.com/board/so-much-gear-so-little-time/373765-diy-transformer-box-add-color.html Look at pre-amps with Transformers (Metric Halo), or the B2 Bomber ADC (Burl Audio), both use Jensen Transformer to add some mojo. Is there a plugin out there that simulates transformer sound? Edit 1: One wrote in the above linked thread " Transformers can do things like this: saturation, adding punch, overtone enhancment, phase shift, resulting in a more 3D sound, by letting the high frequencies later through the transformer...you can´t do this with plug-ins this great and natural." - that was March 2009 - no plugin like this on the market by now? Edit 2: WAVES advertising, but gives some useful explanations: https://www.waves.com/add-harmonic-distortion-for-analog-warmth
  20. What do you think of Molot compressor by vladgsound?
  21. BTW, I see your sample rate is a 96kHz, Independence Samplers are 44.1kHz 24 bit. Why use 96kHz? Makes only sense if you record at the sample rate.
  22. NIIIIIIIIIICCE, Independence is an awesome sampler, kinda underrated which is good for us Magixians
  • Create New...