Jump to content

Pitch shifting and time stretching upon opening saved projects.


Life_inc
 Share

Recommended Posts

Hello new to the forum but been using samplitude a while ,however just recently I have had some rather weird things happen.

Upon saving and closing a project. And then opening it up again. The whole VIP pitch and time shifts so the recordings either sound like chipmunks or demons In a cave.

I'm at a loss to what may cause this as they are saved sounding fine and then do this strange this when re opening.

Any ideas to he

P me out would be great.

Link to comment
Share on other sites

Not sure this applies to your situation, but I ran into this after editing my WAV files using an external editor and that editor changed the sample rate and/or bit depth. I had to delete all the extra Samplitude (.H2 and .HDP) files, then reload the project to get it to play right again.

Link to comment
Share on other sites

I can't say I've ever experienced that problem before. There's no reason why a project should be pitch shifted upon reopening it. Particularly if the entire project has changed pitch. It's a long shot but it may be worth right clicking on the large circular control on the right of the transport. Make sure that Varipitch/Varispeed isn't ticked.

t1l7.jpg

Regards

Kraznet

Link to comment
Share on other sites

Had a look today and the varipitch option is not ticked. But I did try changing the play back sample rate. Switching it from 44100 to some thing else and back solved the play back problem but just until I hit stop. When pressing play again or exporting the file as mp3 the same slowing down occurs.

Link to comment
Share on other sites

just a shot in the dark, as there is no info about your configuration:

could be that the soundcard driver has a different setting and samplitude can not set it, as it needs.

check your sounddriver-configuration dialog, if the samplerate is the same as the projects.

what driver model do you use? asio?

try to set it manually if it differs from the project.

mathias

Link to comment
Share on other sites

If I manually ajuga the project one open and the change the sample rate to somthing the it back to 44100 it will play, as soon as I close the play back dialogue box it switches back. To the slowed version. My sound card is external USB 2 taskam us 122l .

It's control panel allows me to only change latency settings, no option for play back, but states a sample rate of 44100.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...